Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —
📌LAB POINTS
- reproduction of classic audiophile turntable, updated with modern 2023 technology, limited to 400 pieces
- 9” one-piece carbon fiber tonearm w/ adjustable azimuth + VTA
- pre-mounted Sumiko Rainier cartridge
- precision aluminium platter w/ TPE damping
- transparent acrylic plinth
- spring-loaded sub-chassis decoupled from plinth w/ (3) adjustable springs
- dust cover included
- handmade in Europe
This FINAL EDITION series aims to pay homage to our past and allow you to own a piece of Pro-Ject history by bringing back some of the turntables we have made over the last 32 years. We were able to build the Perspective Final Edition like its original predecessor and upgraded some parts to bring the technology to 2023 standards. When you buy a FINAL EDITION turntable, you will receive a certificate which attests that your ProJect turntable is one of the FINAL EDITION series. We have meticulously crafted this turntable with exceptional accuracy and attention to detail, adhering to Pro-Ject‘s well-established high-quality standards. - Pro-Ject
🔎TECH SPECS
- speed: 33/45 (electronic speed change)
- belt drive operation
- platter: 300mm die cast aluminium platter w/ TPE
- mains bearing: high precision stainless steel axle in bronze bushing
- wow & flutter: 33: +/-0,12%; 45: +/-0,11%
- speed drift: 33: +/-0,25%; 45: +/-0,23%
- signal to noise: 70dB
- tonearm: 9” one-piece carbon tonearm
- effective arm length: 230 mm
- overhang: 18mm
- dimensions: 18.2 x 6.89 x 14.17 / 462 x 175 x 360mm
- weight: 17.64 lbs / 8 kg
📦COMES WITH
- Sumiko Rainier Cartridge (pre-mounted)
- power supply
- dust cover
- 7 adaptor
📌LAB POINTS
- entry-level to mid-level audiophile turntable with built-in phono preamp + electronic speed control switch (33/45)
- factory pre-mounted, pre-aligned Ortofon OM5e Cartridge for quick plug+play setup
- preamp can by bypassed for use w/ external preamp or phono input
- 8.6 one-piece aluminum tonearm
- high mass steel platter w/ anti-resonant sub-platter for smooth playback
- dust cover included
🔎TECH SPECS
- manual belt drive operation
- platter: 300mm steel w/ felt mat
- platter bearing: high precision stainless steel axle in bronze bushing
- signal to noise: 68dB
- tonearm: 8.6” one-piece low mass tonearm
- effective arm length: 218.5 mm
- overhang: 18.5mm
- output: RCA
📦COMES WITH
- pre-mounted Ortofon OM5e cartridge
- flat belt for 33 & 45rpm speeds
- round belt for 78rpm speed
- dust cover
- felt mat
- 15V DC / 0.8A power supply
📌LAB POINTS
- entry-level to mid-level audiophile turntable with built-in phono preamp + electronic speed control switch (33/45)
- factory pre-mounted, pre-aligned Ortofon OM5e Cartridge for quick plug+play setup
- preamp can by bypassed for use w/ external preamp or phono input
- 8.6 one-piece aluminum tonearm
- high mass steel platter w/ anti-resonant sub-platter for smooth playback
- dust cover included
The Debut III Phono SB sits in between the T1 Phono SB and the Debut Carbon EVO in the Pro-Ject range. It has a lot in common with previous Debut Carbon models with quality components throughout - a great entry point into audiophile turntables. - TTL
🔎TECH SPECS
- manual belt drive operation
- platter: 300mm steel w/ felt mat
- platter bearing: high precision stainless steel axle in bronze bushing
- signal to noise: 68dB
- tonearm: 8.6” one-piece low mass tonearm
- effective arm length: 218.5 mm
- overhang: 18.5mm
- output: RCA
📦COMES WITH
- pre-mounted Ortofon OM5e cartridge
- flat belt for 33 & 45rpm speeds
- round belt for 78rpm speed
- dust cover
- felt mat
- 15V DC / 0.8A power supply
📌LAB POINTS
- limited edition, official collaboration w/ Metallica
- 8.6 S-Shaped tonearm w/ Pick it S2 C cartridge
- MDF plinth in unique Metallica logo shape, mirror finished metal top plate
- heavy glass platter with aluminum sub platter
- electronic 33/45 rpm speed change via discrete toggle switch (plays 78rpm w/ separate belt, included)
- fully adjustable VTA, tracking force & anti-skating
- height-adjustable aluminum feet, TPE damped
- gold-plated contacts
- handmade in Europe
When you rock vinyl on this deck – Nothing Else Matters. We treated the surface of this deck with a mirror-finished metal logo contour that gives the player its distinctive look. The S-shaped tonearm is fitted with a detachable SME headshell to allow quick cartridge changes. The tonearm bearing and base are machined entirely out of aluminium. Out of the box, the turntable comes pre-adjusted with our Pick it S2 C cartridge. Tracking force and anti-skating are both adjustable and make your Metallica Limited Edition Turntable a true audiophile investment. - Pro-Ject
🔎TECH SPECS
- Speed: 33, 45 via switch (78 via supplied belt)
- Drive principle: belt drive with electronic speed control
- Platter: heavy glass platter
- Platter bearing: high precision stainless steel axle in bronze bushing
- Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
- Speed drift: 33: +/-0,40%; 45: +/-0,30%
- Signal to noise: 68dB
- Tonearm: 8,6” S-shape aluminium; SME headshell
- Effective arm length: 218.5 mm / 7.5 g
- Overhang: 18.5 mm
- Power consumption: 4W / 0W standby
- Dimensions: 16.9 x 4.7 x 16.9 / 430 x 120 x 430mm
- Weight: 9.9 lbs / 4.5 kg
📦COMES WITH
- Pick it S2 C Moving Magnet Cartridge
- felt slipmat
- 45 adapter
- 15V DC power supply
- 78 RPM round belt
📌LAB POINTS
- high-end audiophile turntable made from a combination of unique materials including acrylic, Corian, carbon fiber, MDF, and metal.
- includes Sumiko Amethyst Moving Magnet Cartridge pre-installed (regularly $599)
- quiet belt drive operation w/ AC motor (DC driven AC generator)
- Corian sub-chassis with magnetic suspension
- resonance-optimized sandwich construction of platter w/ combination of MDF and vinyl layer + screw down record clamp
- inverted main bearing with ceramic ball/plate
- electronic speed control w/ 33/45 switching
- carbon fiber Pro-Ject 9cc Evolution tonearm
- top grade RCA connection cable (Pro-Ject Connect It E)
- dust cover included
Pro-ject's 6 PerspeX SB turntable delivers high end sound and functionality with stunning good looks. The acrylic plinth is the first thing you notice, a unique detail that is visibly appealing, that stands on three height adjustable TPE damped aluminum cones. The Corian sub-chassis rests on three magnetic fields that create a suspension system that avoids parasitic noise normally caused by con-ventional spring mechanisms. The resonance-optimized sandwich construction of the platter (a combination of MDF and vinyl layer + screw down record clamp) runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The pre-mounted 9 carbon fiber Pro-Ject 9cc Evolution tonearm rounds out this premium system. Comes complete with dustcover, counterweights, top grade RCA connection cable (Pro-Ject Connect It E), and pre-mounted Sumiko Amethyst MM cartridge. - TTL
🔎TECH SPECS
- speed: 33/45 (electronic speed change)
- belt drive operation
- platter: MDF/vinyl Sandwich (300mm diameter)
- mains bearing: inverted stainless steel with ceramic ball/plate
- wow & flutter: 33 +/-0.10% / 45 +/- 0.10%
- speed drift: 33 +/-0.10% / 45 +/- 0.06%
- signal to noise: 73dB
- tonearm: 9 9cc EVO Carbon
- tonearm bearings with ABEC 7 ballraces
- tracking force: 10 - 35mN
- supplied counterweights: 5 - 7.5gr / 7 - 10gr / 9 - 11gr / 10 - 14gr
- external power supply: 15 volts DC / 800mA
- power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
- cartridge required mounting + alignment
- dimensions: 18 x 7.2 x 14.3 / 460 x 183 x 365mm
- weight: 24.2 lbs / 11 kg
📦COMES WITH
- Sumiko Amethyst MM Cartridge (pre-mounted)
- Connect It E tonearm cable
- record clamp
- dust cover
📌LAB POINTS
- all-in one turntable system w/ bluetooth receiver, line input + power amp
- acrylic platter + proprietary Pick It 25A cartridge (pre-installed), new in S2 model
- easy plug & play setup, just add speakers
- 8.6 aluminum tonearm w/ sapphire bearings
- high contrast display
- belt driven operation, low vibration motor & DC power supply
- special decoupling feet reduces resonance
- includes remote control, dustcover and felt mat
Building on the ground breaking Juke Box E, Juke Box S2 is taking the first audiophile all-in-one system to the next level. By changing to a more sophisticated acrylic platter and an upgraded Pro-Ject proprietary cartridge, we gave the Juke Box the extra bit of audiophilia it deserves. Juke Box S2 effectively saves space by implementing a pre-amplifier and power amplifier in its chassis. Juke Box S2 doesn’t stop at playing vinyl though, you will also be able to connect your smart devices via Bluetooth and listen to your music wireless. On top of that, another analogue input can be found on the back side of Juke Box S2. Simply connect an external source (e.g. a CD Player) and use Juke Box S2 as an amplifier for your speakers. - Pro-Ject
🔎TECH SPECS
- POWER OUTPUT: 2 x 50 watts (4 ohms)
- OUTPUTS: Speakers, Line out (fixed), Variable out, Phono out
- INPUTS: Bluetooth (2.1, EDR), 1x RCA line (analog)
- SPEED: 33, 45 (manual speed change)
- OPERATION: belt drive
- SPEED VARIANCE: 33: 0,8% 45: 0,7%
- PLATTER: 300mm acrylic
- MAIN BEARING: stainless steel in bronze bushing
- TONEARM: 8.6 aluminium
- COUNTERWEIGHT: 3 - 5.5g (included)
- TRACKING FORCE RANGE: 0 - 25mN (18mN pre-adjusted)
- DIMENSIONS: 16.3 x 4.6 x 13.1 / 415 x 118 x 334 mm
- WEIGHT: 5 kg / 11 lbs.
📦COMES WITH
- dust cover
- pre-installed Pick It 25A cartridge
- remote control (batteries included)
- felt mat
- 45 adaptor
- power supply
- allen key
- stylus pressure gauge
- gloves
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://pro-jectusa.com/wp-content/uploads/2020/08/Debut-Carbon-Evolution-Satin-Blue-Lifestyle.jpg)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://pro-jectusa.com/wp-content/uploads/2022/09/Debut-PRO-S-Turntable-1.jpg)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://i0.wp.com/www.project-audio.com/wp-content/uploads/2022/04/X8-11.jpg?fit=1618%2C1080&ssl=1)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://www.turntablelab.com/cdn/shop/products/project-x1-white_1000x1000.jpg?v=1621615832)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://www.henleyaudio.co.uk/Media/images/products/PJAASIG12A/PJAASIG12A-ProductMain_Signature%2012%20Black.jpg?width=1000)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://i0.wp.com/www.project-audio.com/wp-content/uploads/2023/08/T2-W-Lifestyle-2-scaled-e1692945554112.jpg?fit=1920%2C1175&ssl=1)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://m.media-amazon.com/images/I/61hQKDnjP+L._AC_UF1000,1000_QL80_.jpg)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://www.audioadvice.com/media/catalog/product/cache/c6bbdce3cd46370f3aaae71ba6cbbc02/a/1/a1-project-automat-cutout.png)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://www.gearpatrol.com/wp-content/uploads/sites/2/2021/07/1626360764-The-Juke-Box-Line-Gear-Patrol-jpg.webp)
![Pro-Ject Audio: Top Selection of Turntables, Components, Accessories, Parts —](https://uturnaudio.com/cdn/shop/t/66/assets/red_basic_top.png?v=26723206309001099721700161097)