Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm
Par un écrivain mystérieux
Description
Some colors in US&EU&UK&CA are our sub-brand(Cerprise),they are same quality and guareent with Eryone ERYONE PLA Filament has the advantages of easy printing, low shrinkage, and excellent layer bonding. Applicable to 99% of 3D FDM printers on the market, friendly to beginners. High purity raw materials, c
Some colors in US&EU&UK&CA are our sub-brand(Cerprise),they are same quality and guareent with Eryone ERYONE PLA Filament has the advantages of easy printing, low shrinkage, and excellent layer bonding.Applicable to 99% of 3D FDM printers on the market, friendly to beginners.High purity raw materials, corn. Technical SpecificationPrint Any Model You Want with ERYONE PLA Filament.Material: PLALength:340mDiameter: 1.75mm±0.03mmPrint Temperature: 190-220℃Heated Bed Temperature: 55-70°CRecommended Printing Temperature: 210-220℃Recommended Print Speed: 30-100mNeat WindingThe PLA threads are arranged neatly, without the risk of knotting that making printing more comfortable.Premium QualityMaterial wire diameter 1.75mm±0.03mm, ensure smooth output line, vacuum packaging without bubbles, does not block nozzle, make the printing more smooth.Good AdhesionExcellent first layer adhesion to reduce warpage, shrinkage, curl and print failure.Good Layer BondingGood layer bonding strength makes the printing parts stronger. The printed model has a smooth surface. The Difference between White&Gray&BlackShowcase:FAQ 1.Q: Can PLA be used to print tableware?A: Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toner is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.2.Q: The nozzle is clogged by PLA, and how can I solve it? A: Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.3.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it? A: Too high temperature makes the PLA filament melt and flow so fast. Please turn the temperature down to a proper value. The retracting parameters are improper, so adjust the retracting length and speed. 4.Q: There are too much melted filament around the nozzle. What should I do? A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.5.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?A: Normally, the PLA filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.6.Q: The surface of my print isn’t very smooth, and the extruded filament has inconstant diameters. Why? A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.7.Q: Why my PLA-printed objects don't stick to the heated bed? How do I solve?A: The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.
Some colors in US&EU&UK&CA are our sub-brand(Cerprise),they are same quality and guareent with Eryone ERYONE PLA Filament has the advantages of easy printing, low shrinkage, and excellent layer bonding.Applicable to 99% of 3D FDM printers on the market, friendly to beginners.High purity raw materials, corn. Technical SpecificationPrint Any Model You Want with ERYONE PLA Filament.Material: PLALength:340mDiameter: 1.75mm±0.03mmPrint Temperature: 190-220℃Heated Bed Temperature: 55-70°CRecommended Printing Temperature: 210-220℃Recommended Print Speed: 30-100mNeat WindingThe PLA threads are arranged neatly, without the risk of knotting that making printing more comfortable.Premium QualityMaterial wire diameter 1.75mm±0.03mm, ensure smooth output line, vacuum packaging without bubbles, does not block nozzle, make the printing more smooth.Good AdhesionExcellent first layer adhesion to reduce warpage, shrinkage, curl and print failure.Good Layer BondingGood layer bonding strength makes the printing parts stronger. The printed model has a smooth surface. The Difference between White&Gray&BlackShowcase:FAQ 1.Q: Can PLA be used to print tableware?A: Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toner is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.2.Q: The nozzle is clogged by PLA, and how can I solve it? A: Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.3.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it? A: Too high temperature makes the PLA filament melt and flow so fast. Please turn the temperature down to a proper value. The retracting parameters are improper, so adjust the retracting length and speed. 4.Q: There are too much melted filament around the nozzle. What should I do? A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.5.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?A: Normally, the PLA filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.6.Q: The surface of my print isn’t very smooth, and the extruded filament has inconstant diameters. Why? A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.7.Q: Why my PLA-printed objects don't stick to the heated bed? How do I solve?A: The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://eryone3d.com/cdn/shop/products/2_baa5f7f9-72e7-4e47-94f5-43155cc6a418.jpg?v=1651142012)
Eryone Marble PLA Filament (1KG/2.2lbs)- 1.75mm
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://ca.eryone3d.com/cdn/shop/products/PLA_-_-3_754d4505-c6a9-4c5e-92ea-e7aa70fc6038.webp?v=1673417784)
Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm – ca
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://m.media-amazon.com/images/I/71cc2KoA09L._US500_.jpg)
ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://honimarketplace.com/cdn/shop/products/eryone-scented-filament-3d-printer-1kg-22lbsspool-175mm-dimensional-accuracy-005-mm-3d-printer-fast-free-shipping-219430_800x.webp?v=1703350611)
ERYONE Scented Filament 3D Printer 1kg (2.2LBS)/Spool 1.75mm, Dimensio
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://www.whatgeek.com/cdn/shop/files/ERYONERainbowPLAFilamentfor3DPrinter_5_800x.jpg?v=1684377795)
ERYONE Rainbow PLA Filament - WhatGeek
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://uk.eryone3d.com/cdn/shop/products/3_1b3a8bbf-00d7-4c29-9cd3-af78305c64ef.jpg?v=1653979308)
/cdn/shop/products/3_1b3a8bbf-00d7
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://itslitho.com/wp-content/uploads/2020/11/Eryone-matte-white-filament-600x600.jpg)
ERYONE PLA Filament 1.75mm 1kg White • ItsLitho
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://ca.eryone3d.com/cdn/shop/products/0011_6df5474c-95da-4adb-9fd9-f4e1b91c30d9.jpg?v=1705128867)
/cdn/shop/products/0011_6df5474c-95
Material TPU is a polymer material between rubber and plastic. It has excellent high tension, high tensile strength, toughness and aging resistance.
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://m.media-amazon.com/images/I/71guz5gWSqL.jpg)
ERYONE Filament TPU 1.75mm +/-0.05mm for 3D Printer, 95A, 1kg (2.2 LBS) / Spool, Black
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://itslitho.com/wp-content/uploads/2020/11/eryone-pla-3d-printer-filament-175mm-dimensional-accuracy-005-mm-1kg.jpg)
ERYONE PLA Filament 1.75mm 1kg White • ItsLitho
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://m.media-amazon.com/images/I/71NLCGUJUEL.jpg)
ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA
![Eryone PLA Filament 1.75mm for 3D Printer 1Kg +/- 0.05 mm](https://www.geekmaxi.com/img/product_description_g/2046/2046_4.jpg)
ERYONE Silk PLA Filament for 3D Printer 1.75mm Tolerance ±0.03mm
depuis
par adulte (le prix varie selon la taille du groupe)